A controlled process, from drawing to dispatch
Every part follows the same six stages under our ISO-certified quality system, with checks at each hand-off.
- 01
Design & die engineering
We review your drawing for castability, agree critical dimensions and tolerances, and design the die: parting line, gating and risers, cores and cooling.
- 02
Tooling & trials
The die is built in our own shop. Trial castings are measured against the drawing and the die is corrected until samples are approved.
- 03
Casting & heat treatment
Melt temperature, degassing and die temperature are controlled through every shift. Heat treatment such as T6 is applied where the drawing calls for it.
- 04
Inspection & testing
Castings are checked visually and dimensionally, with further tests agreed per part — for example hardness or leak testing.
- 05
Machining & finishing
Through qualified machining partners, so you can receive ready-to-fit parts with one point of contact.
- 06
Packing & dispatch
Parts are packed to protect machined faces and labelled by lot for traceability, for domestic delivery or export.
Quality system
ISO certified, documented, traceable
Our procedures are certified to ISO 9001:2015. Inspection results are recorded for each lot and shared with customers on request.
Need a sample report with your quote?
Ask for first-article inspection details when you send your drawing.